Embedded Systems & IoT
Firmware, embedded Linux, sensor integration and edge AI that connect machines and devices to the software your teams use.
Many operational problems start at the machine: a reading nobody captures, a sensor that cannot talk to the network, a camera whose images never reach the quality team. ShichifukuTekx connects devices to software. We work from firmware up to cloud dashboards, for industrial and product companies in the UAE, the GCC and worldwide.
How does an IoT project connect machines to business software?
The chain usually has four links. A device or sensor measures something. Firmware or an edge gateway reads it, filters it and sends it securely, often over MQTT or an industrial protocol such as Modbus. A backend stores and processes the data. Software turns it into dashboards, alerts or records in your ERP or MES. We design and build every link, so data arrives complete and usable instead of stuck at the gateway.
What we deliver:
- Firmware in C and C++, bare-metal or on an RTOS, including drivers and low-level I/O.
- Embedded Linux board bring-up and BSP porting for gateways and smart devices.
- Sensor and equipment integration with industrial protocols, PLC data and retrofit sensors on existing machines.
- Hardware prototyping supportboard selection, firmware for prototypes, test rigs and coordination with manufacturing partners.
- Edge AI that runs vision or anomaly models on the device when latency, bandwidth or privacy rule out the cloud.
We do not run a hardware factory. For enclosures, PCB production and volume manufacturing, we work alongside your chosen manufacturers. Device data then flows into data and forecasting work, such as predictive maintenance, or into custom software your teams already use, hosted with the cloud and DevOps practices we apply everywhere.
What changes for your team
What you get from us
A written scope you can hold us to.
- System architecture from sensor to cloud or on-premise backend
- Firmware in C/C++ on bare-metal or RTOS
- Embedded Linux board bring-up and BSP porting
- Sensor, PLC and industrial protocol integration
- Edge gateway software with buffering and secure transport
- Edge AI models for vision or anomaly detection
- Backend services, data storage and device management
- Dashboards, alerts and ERP or MES integration
- Test rigs, validation reports and field update procedure
From first call to production
Every step ends with something you can see.
- 01
Discovery sprint
Two to three weeks to review devices, signals and site conditions, and define what data is needed and where it must go.
- 02
Prototype
We build a working chain on a few devices, from sensor through firmware to a simple dashboard.
- 03
Harden and integrate
We add security, buffering, remote updates and connections to your ERP, MES or analytics platform.
- 04
Pilot and deploy
A site pilot proves reliability before rollout, with on-site or edge deployment and training for your engineers.
- 05
Scale and extend
We add devices, sites and edge AI models as the system proves its value.
Ways to work with us
Questions about this service
Do you manufacture hardware?
No. We do not run a hardware factory. We write firmware, port embedded Linux, integrate sensors and equipment, build test rigs and support hardware prototyping. For PCB production, enclosures and volume manufacturing, we work alongside manufacturers you choose, or help you brief them, and focus on making devices work reliably with your software.
Can you connect our existing machines to a dashboard?
Usually, yes. Many machines already expose data through PLCs or industrial protocols such as Modbus. Where they do not, we can retrofit sensors. An edge gateway collects the data and sends it securely to a backend, where it feeds dashboards, alerts or your ERP. We start with a small pilot to prove the data path.
What is edge AI and when should we use it?
Edge AI runs machine learning models on or near the device instead of in the cloud. Use it when you need instant decisions, when bandwidth is limited, or when images and data should not leave the site. Typical uses are visual defect detection on a line and anomaly detection on machine signals.
How much does an IoT project cost?
Cost depends on the number and type of devices, the protocols involved, site conditions and whether custom firmware is needed. A pilot on a few machines is a much smaller commitment than a multi-site rollout. A 2 to 3 week discovery sprint defines the architecture and gives you a costed prototype plan before hardware spending.
What is the difference between firmware and embedded Linux?
Firmware usually runs directly on a microcontroller, bare-metal or on a small RTOS, and handles tightly timed tasks such as reading sensors and driving outputs. Embedded Linux runs on more capable processors and suits gateways and devices that need networking, storage or on-device AI. Many systems combine both.
How do you keep IoT devices secure?
We use encrypted transport, unique device credentials, closed unused ports and signed firmware or software updates. Gateways buffer data locally, so a network outage does not lose readings. Devices are registered in a management service, which makes it possible to update, monitor or revoke them remotely across sites.